6056 Liqui Moly – Bike Tire (Puncture) Fix

ر.ع.7.700 VAT

6056 Liqui Moly – Bike Tire (Puncture) Fix

DESCRIPTION
The 6056 Liqui Moly – Bike Tire (Puncture) Fix is a special combination of active agents for (tire/tube) first aid in the event of punctured tires. Repairs flat tires without the need for removal. Not suitable for use on tubes that ripped or cut at the side, or if the tire has slipped off the rim.

Properties
– subsequent tire repair possible
– rapid remedy for punctures without dismantling
– simple to use

Content measure
75 ml Can aerosol

Areas of application
For first aid for tire punctures on bicycle tires from 12 to 29 inches. For tubeless and standard bicycle tires. Can be used for all common bicycle valves (Schrader, Presta and Dunlop valves).

Application
Where possible, remove any causes of the puncture first (e.g. nails, screws). Then bring the wheel with the valve into the 12 o’clock position and deflate fully. Shake the can well, screw the screw connector onto the tire valve, hold the can vertical and use the entire can. Then remove the can and wipe off excess material. Finally, adjust the tire air pressure and take off immediately so that the foam can be distributed evenly. Depending on the size of the puncture, it may be necessary to pump more air after a few minutes. In most cases, a solid plug sealing the hole will have formed after 10 minutes.

Comment
Do not forget to go to a workshop to have the tire professionally repaired.

4100420060564 , , Brand:

6056 Liqui Moly – Bike Tire (Puncture) Fix

DESCRIPTION
The 6056 Liqui Moly – Bike Tire (Puncture) Fix is a special combination of active agents for (tire/tube) first aid in the event of punctured tires. Repairs flat tires without the need for removal. Not suitable for use on tubes that ripped or cut at the side, or if the tire has slipped off the rim.

Properties
– subsequent tire repair possible
– rapid remedy for punctures without dismantling
– simple to use

Content measure
75 ml Can aerosol

Areas of application
For first aid for tire punctures on bicycle tires from 12 to 29 inches. For tubeless and standard bicycle tires. Can be used for all common bicycle valves (Schrader, Presta and Dunlop valves).

Application
Where possible, remove any causes of the puncture first (e.g. nails, screws). Then bring the wheel with the valve into the 12 o’clock position and deflate fully. Shake the can well, screw the screw connector onto the tire valve, hold the can vertical and use the entire can. Then remove the can and wipe off excess material. Finally, adjust the tire air pressure and take off immediately so that the foam can be distributed evenly. Depending on the size of the puncture, it may be necessary to pump more air after a few minutes. In most cases, a solid plug sealing the hole will have formed after 10 minutes.

Comment
Do not forget to go to a workshop to have the tire professionally repaired.

The product has been added to your cart.

Continue shopping View Cart