Forging and hardening by T6 strengthen the material enough, so far less of it is needed to be used. This means even less weight with even more stiffness. Stem ULTIMATE XC 70 is one of the best of what you can use for your XC adventures.
• Screws on the head enter the stem at an angle of 12° which toughens the whole mount of handlebars to the stem
• Alloy 6061 is commonly used in yacht constructions, automotive chassis, or scuba tanks. This aluminium alloy is made to last long under really big pressures
• 3D forging – Solid block of heated aluminium is forged and compressed into the desired mould. The advantage of this technology is that no welding needs to be used – everything is made out of a one-piece alloy block. So, the component is lighter and stronger in the end
• T6 – treatment of material in cyclic changes of specific conditions to achieve a significant increase of structure. Also called the “Aging Process”
DETAILS
Angle: +/- 7°
Handlebar diameter: 31,8mm
Steerer tube diameter: 28,6mm
BUYERS OPTIONS
Extension: 60-130mm
Colour: Sand Blasted Black
COMPATIBILITY
All common stems with a diameter of 31,8mm
All common forks with a steerer tube diameter of 28,6mm
Bicycle Inner Tube 14″ x 1.75 (Schrader Valve) 14″ butyl rubber inner bicycle tubes. Current stock is 12″x1.75 with 48MM A/V (Schrader Valves /American Valves / Car Valves). These tubes easily fit in tires marked 14″ x 1.75, 14″ x…
Derailleur Hanger MTB Allutec alloy, Protec – DH-27 This Dropout Hanger (7) is for Kellys Bikes, but it fits many other bikes too. For other bikes make compatibility, please refer to Kellys Kellys: Avenue 70: 2015 Kellys: Carter 70:…
Cartridge Bottom Bracket set KLS ACTIVE – 122,5mm SEALED BOTTOM BRACKET Sealed bottom bracket KLS ACTIVE is made for all bikes which have cranks with common square bottom bracket mount DETAILS Sealed bearing Square Taper chain-wheel mount BSA: BC1.37″x24T R/L…
25.200Current price is: 25.200. VAT
2.100Current price is: 2.100. VAT
