CRX/URB 70 S
The shock of suspended Seatpost CRX/URB 70 S will reduce all small bumps and small obstacles completely and will also help to reduce the sharp shocks caused by big bumps or big obstacles. This brings comfort ride to an otherwise hostile environment. Forged head and hardened alloy brings sufficient durability which can withstand the most difficult conditions. Intended mostly for Cross a Trekking/Touring rides but will also fit very well into the Urban environment for riders with 40-80k. Suspension can be adjusted according to riders taste with help of hex screw on the bottom part of the Seatpost. By tightening the screw suspension gets stiffer and thus suitable for heavier riders. By loosening the screw suspension gets softer and thus better suited for lighter riders.
Alloy 6061 commonly used in yacht constructions, automotive chassis, or scuba tanks. This aluminium alloy is made to last long under really big pressures
Forged – Solid block of heated aluminium is forged and compressed into the desired mould. This results in stiffer material which can withstand higher pressures
T6 – treatment of material in cyclic changes of specific conditions to achieve a significant increase in structure. Also called “Aging Process”
Easy to set-up using the scale
DETAILS
Length: 350mm
Offset: 15mm
BUYERS OPTIONS
Diameter: 31.6mm
Colour: Sand Blasted Black
COMPATIBILITY
All common seat tubes with the diameter of 31.6mm
CRX/URB 70 S
The shock of suspended Seatpost CRX/URB 70 S will reduce all small bumps and small obstacles completely and will also help to reduce the sharp shocks caused by big bumps or big obstacles. This brings comfort ride to an otherwise hostile environment. Forged head and hardened alloy brings sufficient durability which can withstand the most difficult conditions. Intended mostly for Cross a Trekking/Touring rides but will also fit very well into the Urban environment for riders with 40-80k. Suspension can be adjusted according to riders taste with help of hex screw on the bottom part of the Seatpost. By tightening the screw suspension gets stiffer and thus suitable for heavier riders. By loosening the screw suspension gets softer and thus better suited for lighter riders.
Alloy 6061 commonly used in yacht constructions, automotive chassis, or scuba tanks. This aluminium alloy is made to last long under really big pressures
Forged – Solid block of heated aluminium is forged and compressed into the desired mould. This results in stiffer material which can withstand higher pressures
T6 – treatment of material in cyclic changes of specific conditions to achieve a significant increase in structure. Also called “Aging Process”
Easy to set-up using the scale
DETAILS
Length: 350mm
Offset: 15mm
BUYERS OPTIONS
Diameter: 31.6mm
Colour: Sand Blasted Black
COMPATIBILITY
All common seat tubes with the diameter of 31.6mm
